New Features

• Added an N2 Monitor and burnable gas calculations to the Gas Meters
• Tubing and casing draw down will calculate using either gauge and absolute pressure
• Print Rough Notes sheets based on the field measurements table
• Select and print a range of rows
• Auto-saved files can be easily recovered through the help menu

Corrected Issues

• Corrected rounding errors in Produced to cums in PAS Test Data
• Removed the size restriction on unformatted UWIs when creating PAS files
• PAS Viewer now legible in Vista
• Most of the Plot auto scaling issues are resolved
• Sparse columns such as choke size have the ability to display and print the carried down value

Note

• The N2 monitor and burnable gas columns are not yet available under Production Totals

Field Measurements Table

• Summary Event
  • Summary events can be calculated over:
    • a date/time range
    • a period of hours
    • from the previous summary event
    • for the entire test
  • Summary events includes all the cumulative columns from:
    • Production totals
    • Load to recover
  • Summary events are customizable and repeatable
  • Values displayed in the summary are recalculated as required.
  • Allow for additional comments
• Hydrate Monitor
  • Introduces a new color coded column called status.
    • White – Insufficient information to calculate
    • Green – Every thing measured is OK
    • Yellow – Conditions for freezing off exist
  • Letters indicate where the hydrate condition may exist
    • T – Tubing
    • C – Casing
    • D – Downstream
    • G – Gas Meter
• New production totals columns include:
  • Total fluid for all meters
  • Total columns for net gas
  • Total columns for the frac gas components
  • Total columns for the acid gas components
  • Total water vapour for the SAGD monitor
  • Total Gas Produced to Columns
• Produced to Events allows the allocation of the gas produced to the following production streams.
  • Flared
  • Vented
  • Incinerated
  • Pipeline
• Integrated spell checker for all comments and events.
• Multiline comments
• Improved cut, copy & paste to include comments allowing users to copy data between files.
• Added downstream pressure and temperature columns in the wellhead group

Gas Meters

• Added an Accelabar meter
• Added a Gas Produced Volume Meter
• Added three V-Cone manufacturing type:
  • McCrometer V-Cone
  • McCrometer Wafer Cone
  • Cameron V-Cone
• Updated the AGA 3 (orifice meter) calculations. Existing files will continue to use the old calculation.
• Added propane (C3) as a frac gas to the frac monitor.
• Frac and Acid gases can be reported in tonnes
• Frac gas can be reported in liquid volume equivalents of bbls or M3
• Calculate gas rate using a changing gas composition (advanced)
• Calculate gas rate using a changing gravity (advanced)
• Orifice meter constants can be displayed (advanced)

Oil Meters

• API group calculates API@60F given a measured API and sample temperature
• Added the oil density unit g/cc
• Load to recovery includes oil, water and fluid
• Load to recovery relocated out of the fluid meters to its own group
• Enable swab is now available as part of the meter properties
• GOR2 calculations to determine the amount of gas remaining in oil as it exits the separator (advanced).
• Liberated gas calculation to determine the available gas production at producing conditions (advanced).
• Stock tank shrinkage calculations expanded to include:
  • User specified total shrinkage (standard)
  • Full shrinkage calculation FieldNotes calculates shrinkage due gas, temperature and total (advanced).
  • User specified shrinkage due gas FieldNotes calculates shrinkage due to temperature and total shrinkage (advanced).
• Oil@60F calculates correct the metered oil reading to 60F (advanced).

Print Preview (Reporting)

• Quick Print
  • Provides a quick way to print out a predetermined set of collated reports.
  • A quick print is customizable and easy to setup.
  • Quick Print to PDF automatically prints the report into a PDF file.
  • FieldNotes provides built-in PDF printing when used with the PDFCamp print driver that is shipped with FieldNotes.
  • Quick print is built into the Send To: feature allowing users to automatically generate a PDF file and attach it to their email.
• Added Adobe (PDF) report templates
• Annotation editor upgrade
• Removed the empty rows at the end of the field measurement report using the time filter.
• Print only the last 6, 12, 24, 48… hours of the field measurement table.

Plots

• Simplified Plot Configuration
  • Changed the list of available curves to a the tree structure similar to the meter tree.
  • Simple drag the curve around on the axis tree to move them between axis or to link curve together on an axis.
  • Select the curve in the axis tree and customize it appearance.
• Plot data and axis name will automatically synchronize themselves with the column titles and working units.
• Dockable or floating plots (advanced).

Pas

• Use either net gas values or total gas values when reporting to the ERCB.
• Produced to events will automatically flow through to the Test Data section in the PAS file.

General

• FieldNotes provides multilevel security simplifying the installation of the advanced features like the Modbus Snap-In.
• Updated help file.
• Send To: email feature allows the users to automatically generate and attach PDF or CSV files in addition to the working FLD file to the client’s email.
• Send To Fekete support: Allows users to contact Fekete support directly.
• Change the location of configuration folders to support restricted user on Vista and XP.
• ASCII text import (advanced)

Real Time and Modbus (advanced)

• Corrected a number of grid trending issues, including the issue with the adding of blank lines in real time when the user cursors down.
• Added separator channels to all the oil meters
• Added down stream channels in the wellhead group.
• Real time alarms for critical maximum and minimum values support in FieldNotes through Fekete’s ModBus Snap-In
• New MBConfig program configuring the data acquisition systems.
• Optimization plot drawing
• Provided WITS output for communicating with real time drilling systems.

New Features

Added Well License information to both the General and Well Information Data tabs and reports.

Changed the default value of Production Summary Cut Off Time from 12:00:00 to 06:00:00

Introduced print scaling factors for the Field Measurement and Report Tables This will allow the user to display more data columns and rows on a page without compromising readability of their working (input) screen. Located under: File → Preferences → Table

The path to or the folder location of the FLD File being printed can now be suppressed. This option is located under: Preview Report Tab → Change Report Settings

New Features

All fluid meters support the remaining fluid to recover calculation; just enter the initial injected fluid volume. As the fluid is produced the remaining to recover fluid volume is decremented accordingly. 

Swabbing operations can be added to any fluid meter. Different swabbing sequences can be identified and reported through the use of start/stop swabbing events.

All fluid meter supports the use of Tank Tables simply enter the manufacturer's tank specifications and description. In the Measured Level meter, select the tank table, enter in the fluid level, and FieldNotes
will calculate the produced volume.

The Hydrostatic Pressure Meter can be used in conjunction with the Measured Level meter. If you have the static head pressure and the fluid density, FieldNotes can calculate the level of the fluid in the tank.

Automatic File Compression has been added for FieldNotes files.

Print only the last 6, 12, 24, 48… hours of the Field Measurement table.

Automatic e-mail your FieldNotes files to your clients every day or more often.

Real Time Alarms for critical maximum and minimum values support in FieldNotes through Fekete’s ModBus SnapIn.

New Real Time configuration program for data acquisition systems that support the ModBus protocol.

Known Issues/Fixes

Bean Choke correlation update for meters. Changed default decimal place to 3 for meter and plate size. In the BW&R Gas Properties, Tc and Pc set to use 2 decimal  precision. Entered Pc and Tc values in the BW&R gas property were overwritten when the correlation changed to AGADetail and back again.

New Swab report, a close button was added to the Print Preview Page.

Silent mode now supports printer settings for printer name and paper size, and can use all filter options including print last n hours

ModBus now provides support for FieldNotes new Hydrostatic Pressure Meter.

ModBus can be used for Real Time monitoring of data channels for Alarm detection and notification when values exceed the specified critical maximum value or drops bellow the critical minimum value.

Added ability to change multiple row heights at the same time.

In the Meter configuration Properties, the Unit dropdown boxes are disabled and enabled depending on the active of unit state.

Known Issues/Fixes

Inputted Tc and Pc values will be saved via Gas Properties.

AGA8 Detail: When all input gas properties are added up to 100 %, it will automatically re-calculate gas rate and cum. without having to click the “Normalize” button.

Add Legend Menu was added to plotting system.

New Features

Plate and chokes sizes can be entered using fractional inchs (i.e. 1-7/16).

Added the API code for U.S. wells, packer depth, and tubing & casing weight to the Well Information Data tab.

Sparse data columns (i.e. choke size) will now show duplicate inputs.

Field Measurements and Report Tables use their own private fonts.

Using Microsoft Version Number System.

Release notes can be accessed via Help, Release Notes.

File version history information is now available via Help, File Information.

Optimized the calculation processes for handling large datasets: 100,000 plus.

Activated major and minor grid lines to clock time axis.

Gas meter enhancement: H2S Percent input column has been added to the acid gas process and the warning system, when Frac gas percentage is less than the percentage in the meter’s gas properties, has been enhanced.

Oil Meters enhancement: added oil shrinkage calculation based on API, separator pressure,separator temperature.

Added a new Oil Gas Ratio (OGR) column to Production Totals. The Production Summary page now handles the zero meter event(s).

Added “Test Cum” columns. Test Cum is a running cumulative column for the duration of the test, It is not affected by zeroing meters. Test Cum columns can be activated from the Advance tab in preferences.

The ModBus Snap-In provides support for all Gas and Fluid meter types.

ModBus meters are now template friendly. When starting up ModBus for real time data gathering, FieldNotes attempts to associate the specified meter in the ModBus configuration with an existing meter in the template.

Added an interface to MRL Solutions Inc. ”Middle Ware Unit” in the ModBus Snap-In.

Improved Silent Mode operations for web site delivery of reports.

Known Issues/Fixes

Improved loading of Version 2.xx files:
• Field Measurements and the Report Tables load their Fonts correctly,
• Tables will only display columns mark as visible,
• Tables attempts to approximate the stored column widths,
• In Gas Properties, the Rich Gas flag is being transferred.

When loading template files the Plot Scaling was not loaded correctly.

Gas meters fix: the Frac gas cumulative was calculated using instantaneous rate rather than average rate.

“Final Test Date” being imported correctly with PAS files, and PAS file comments are now formatted properly.

Total cumulative production for multiple meters, did not carry forward the cumulative production when the meter was shut-in.

New Features

Instructional Video Tutorial (Located under Help on the Menu Bar).

Redesigned user interface. The Field Measurements table and Report tables support meter name centered as a title over the respective meter columns, and spreadsheet-style column and row sizing.

New plotting system that allows you to adjust plot scales with a simple click and drag, to plot toolbar for common used functions, and to do enhanced curve selection and customization.

Expanded Meter Configuration Bar, enabling you to set the display properties of any column by simply clicking on the object name in the tree and editing them in the properties window below. You can also enable, disable and group columns via checkbox.

Completely New Reporting system by which you can build, edit and save custom reports, select and position any piece of data on any report, build different reporting templates for different test types or clients, and mix plots and data together on the same page.

Enhancements Meters by which flow-shut-in coloring indicates each meters individual status and each Meter contains its own Flow time data.

With Enhancement Meters, you can separate produced fluids into Oil, Water and Sediment streams for reporting rates and cumulatives, track and calculate N2, CO2 or H2S rates and cumulatives for clean ups and acid gas reporting, globally zero cumulative production for all meters, and remap the Vortex meter into its proper mode of operation as a pulse reading device.

Due to more clients using flow computers to measure rates we expanded the Measured Rate Meter to accommodate the three possible types of gas flow measurements (Unadjusted, Standard Conditions, Standard Conditions Less Z) and added a special rate meter for those using a Systech flow computer.

Comments are now considered Events. Select from a predefined list of common comments and add, edit and remove Comments from the selection list.

Zero cumulative production for all meters, resets the cumulative for all meters and inserts a special comment identifying the event.

New Features

Bitlock driver upgrades.

New Features

PAS PRD format updated to match EUB changes.

Old reports have been added back into this version (except the recorder report).

Options dialog box has been fixed.

Printing reports (with page breaks for each day or several days of well shut-in data) no longer requires a comment on every day to print the subtotals correctly.

Print filter has been implemented.

PAS PRD import data from FieldNotes 1.780 has been improved, with the ability to add API, pH and Salinity columns.

Known Issues/Fixes

We are continuing to fix any known issues with regards to the PAS PRD format:
• FieldNotes now imports PAS PRD 4.0 format.
• "Certify no longer" errors on same date and time.
• ~DTLIQ(#) LTLQ Defaults TRBG, TRBF, pH, BSW, readjusted to meet the requirements of the EUB
• DTGAS(#) Temperature Default now 0 C not -273.15 C.
• ~TEST DATA Sum of FLGAS, INGAS, PLGAS and VNGAS volumes are no longer out by 0.0001.

In PAS Viewer, copy (exactly) the last entry from the Cumulative Total Gas Volume All Meters column from the Data Table Summary into the appropriate field in Test Data. If you need to divide the volume between two more fields, the total must equal (exactly) the last entry in the Cumulative Total Gas Volume All Meters column from the Data Table Summary.

Some common errors include:
• Value [xx.xxxx] of ~DTSUM,VTGAS.E3M3, {Cumulative Total Gas Volume All Meters} just equal the total yy.yyyy of FLGAS, INGAS, PLGAS, VNGAS, in data table DTSUM.

Known Issues/Fixes

Gas composition appears in New Meter Reports only.
NOTE: Do not use old reports. They will be removed in the next version.

When opening a file that has a gas meter deleted, it caused FieldNotes to crash. This has been resolved with no loss of data.

We have fixed all known issues to date with regards to the PAS PRD format, as follows:
• Improved Certify.
• All time errors for any table are shown as the date and time in the PAS certify status window.
• A Recertify button has been added to PAS certify status window.
• ~DTLIQ(#) LTLQ Sum of water, oil and cond. volumes are no longer out by 0.0001.
• Copy and paste works between all editors.
• We no longer has small differences between the PAS pages and Field Measurement page for gas rates and volumes.
• Empty meters do not appear in PAS.
• Some common errors include:
• Value [xx.xxxx] of ~DTSUM,VTGAS.E3M3, {Cumulative Total Gas Volume All Meters} just equal the total yy.yyyy of FLGAS, INGAS, PLGAS, VNGAS, in data table DTSUM.
• In PAS Viewer copy exactly the last entry from the Cumulative Total Gas Volume All Meters column from the Data Table Summary into the appropriate field in Test Data. If you need to divide the volume between two more fields the total must exactly equal the last entry in the Cumulative Total Gas Volume All Meters column from the Data Table Summary.

Known Issues/Fixes

In some instances when File was saved, they could not be re-opened. The data is not lost and can be opened with this version.

Removed some of the PAS Ver. 2.1 options. We are continuing to fix any known issues with regards to the PAS PRD format.

Known Issues/Fixes

We have fixed all known issues to date with regards to the PAS PRD format, as follows:

• Value [xx.xxxx] of ~DTSUM,VTGAS.E3M3, {Cumulative Total Gas Volume All Meters} just equal the total yy.yyyy of FLGAS, INGAS, PLGAS, VNGAS, in data table DTSUM. In PAS Viewer copy exactly the last entry from the Cumulative Total Gas Volume All Meters column from the Data Table Summary into the appropriate field in Test Data. If you need to dived the volume between two more fields the total must equal the last entry in the Cumulative Total Gas Volume All Meters column from the Data Table Summary.

• At least one line must contain a non null value for attribute ~DTLIC (1),API,{API}. This occurs in Oil Meters; you must enter the API value in your oil meter located in the Meter Configuration Bar.

• At least one line must contain a non null value for attribute ~DTLIC (1),PH., {Ph}. In Data Field Measurements right click on a columns title, select show columns from the menu, from the the list select the pH column. Enter the pH values on lines that correspond to a fluid meter reading.

• At least one line must contain a non null value for attribute ~DTLIC (1),SALT., {Salinity Ppm}. In Data Field Measurements right click on a columns title, select show columns from the menu, from the list select the Salinity column. Enter the Salinity values on lines that correspond to a fluid meter reading.

Known Issues/Fixes

In Alberta, effective July 5, 2004, the regulatory board has updated the PAS standard from version 2.1 to version 4.0. FieldNotes version 2.000 supports reading and writing both versions of PAS.

There are two new tabs on the left side, Data and PAS Viewer, that you will see on start-up. The Data tab contains the table and plots. The PAS Viewer Tab contains required PAS version 4.0 information. The only tabs you need to complete are WellInfo and TestData. Other tabs will automatically be updated from the data that you have already entered into the tables and meters.

No new Meters types have been added for this release. However, we added a new gas properties correlation (AGA8) as an option when setting up the reservoir gas composition.

When configuring columns for a new gas meter you will notice eight new columns: Three gas component columns (H2S, N2 CO2), Three columns to track the cumulative volumes of each component, a net cumulative gas column, and a diagnostic column (Z factor).

The Meter Configuration Bar can now be resized and attached to any edge of a FieldNotes window.

When you read a PAS file into FieldNotes it goes into what is called “Viewer” mode. This means that FieldNotes will NOT recalculate the rates and cum automatically. You will not be allowed to edit any of the data. Don’t panic, once you press the recalculate button or select the “Recalculate” menu entry, FieldNotes will return to full functionality.

Due to PAS requirement changes, the Ph column must have at least one Entry for all oil meters. Also the Salinity column must have at least one entry when using either an oil or water meter.

New Features

Real time support is now available for the Fluid Volume Meter.

New Features

Meters In the Meter report now display the full name for Orifice meter location and type. In Fluid meters the measurement type also prints the full name, i.e. Cumulative rather than C.

Table Titles can be specified by selecting Options + Customize Table + Page Set-up from the menu bar.

Table/Plot Headers are indicated with four lines to the left and right of table/plot titles. You can select from a list of 26 data elements. The selection can be saved as a default for new files or reloaded on demand. Select Options + Table/Plot Header Setup from the menu bar.

Real time support is now available for the V-Cone Meter.

Two new Toolbar buttons control the real time updates on the table and plots. These buttons allow you to pause automatic redrawing of data on the screen as it is received. This allows you to easily manipulate the plot or table, i.e. add comments.

Known Issues/Fixes

Web Update Prompt. Some users had problems with FieldNotes launching their Internet dialer software when they were not connected to the web. When you start the program it prompts you to check for upgrades. If you select Yes, the results appear in the About Box (at the start up screen). If you select No, you will not be prompted for upgrades again, no mater how many times you launch the software. If you select 21 days, you will be reminded to check for upgrades after 21 days have expired.

Files created in FieldNotes 1.750 or greater will NOT be downwards compatible. That means you can open your existing files, but you can not open Version 1.750 files with FieldNotes version 1.653.

Known Issues/Fixes

Delete a Meter. Using the Meter Configuration Bar right mouse click on the meter you wish to delete. A menu will appear with the delete option. Select Delete the meter is then removed permanently from the table and plots.

Data transfer between Field Measurements to Activity Log has been greatly improved.

PAS Vortex meter files were not saved correctly, this has been fixed. The only people who would notice this error are other FieldNotes™ user who import the pas file. It is not an error condition for the EUB or Clients using F.A.S.T. WellTest™ or F.A.S.T. ValiData™.

The About Box (the start up screen) has some modifications to it. If you e-mail you can e-mail fieldnotes@fekete.com directly and attach your file. If you are connected to the Internet you will receive notification of a new upgrade and have the ability to download it at time.

Files created in FieldNotes™ 1.750 or greater will NOT be downwards compatible. That means you can open all your existing files, but you CANNOT open 1.750… files with FieldNotes™ version 1.653.

Known Issues/Fixes

Shipped the missing spell checker help file.

In the data tables the spell checker only checked the first 20 or so lines regardless of which line you selected.

Data transfer between Field Measurements to Activity Log would change the date on the first line. This caused the comments to get duplicated when returning back to Field Measurement table.

Print Margins were not saving correct location.

New Features

The following new features: AutoSave, Spell Checking, New Reports, Real-Time Data Acquisition, Expanded Vortex Meter, New Gas V-Cone Meter, and Improved Fluid Turbine Meters have been added.

File, Import: copies ASCII data directly into FieldNotes columns. Note: Meters and Generic Columns must be assigned before importing.

The new report manager is located in the File, Reports menu. You can select the order reports are printed or viewed. All reports have a new look, and can be customized.

The old report manager is located in the File, Old Reports menu. This menu will be eliminated in future versions.

Data, Well Information: supports all survey systems in the PAS editors.

Data, NotePad: Active spell checking.

Data, Sour Gas Flaring: Flaring dates table reorganized.

Data, Sample information Sheet: Container table simplified.

Option, New File Defaults, AutoSave: Automatically saves a copy of your working file every 10 minutes (default) onto your hard drive.

Option, New File Defaults, Reports: Folder where the report template files are stored.

Option, New File Defaults, Templates: Default working folder where templates are located.

Option, New File Defaults, Dictionaries: The folder containing the spell checker's dictionaries.

The Help, Release Note menu tells you what is in this upgrade. You can shut it off by checking the box in the lower right. The HELP SYSTEM has been Totally Revised.

The Gas Vortex meter has been expanded to accommodate the various data formats available.

Meter Descriptions:
– The Standard Rate is the initial implementation when a flow computer (at the meter) is used to calculate rates at standard conditions with fixed or no compressibility correction.
– The Actual Rate method is the raw/measured gas rate at flowing conditions NOT converted to standard conditions.
– The Pulse is actual count from accumulator/totalizer and is used with Real Time Data Acquisition.
– Gas V-Cone is a meter type which behaves like an Orifice Meter with a fixed orifice size.

Fluid Turbine has been formatted to work with k-factors and pulses.

Field Measurements: The spell checker is activated by right clicking on the comment cell.

Activity Log: You can enter or modify comments here directly BUT, they must have an accompanying date and time tag to be properly inserted into the Field Measurements table.

Known Issues/Fixes

Files created in FieldNotes version 1.750 will NOT be downwards compatible. That means you can open all your existing files, but you CAN NOT open these files with Version 1.653.

New Features

Scaling fixed for units of (11,000, 21,000 etc.).

.Bak "backup" files can be controlled under Options, New File.

Known Issues/Fixes

Sample Report had mixed up fields and did not work on some printers.

Date time on plots crashed if you did not use YYYY/MM/DD.

Temporary file relocated from working directory (bad when using floppies) to Windows temp directory.

New Features

Multiple Table and Plot Layouts.

Added the following reports: Sample Information Sheet, Pre-Job Safety Check List, Safety Meeting Sheet, Sour Gas Flaring Report.

Enhancements: Notepad, additional Gas Meter (Vortex), simplified Gas Property input, ability to move legend on Plot Layout, production summary calculations.

Known Issues/Fixes

Files created in this version are NOT compatible with older versions of FieldNotes32.

Known Issues/Fixes

Column titles can be typed in using the enter key as would be expected in order to separate lines.

Clock time error of 6:47 displaying as 6:46:59 is fixed.

Improved loading of old FieldNotes files. All columns should now be read in with their edited titles.

Phantom table pages no longer appear.

When there is a Date change on the first line of a new page we will not force the date back to that of the previous page.

Cumulative time calculations will not start until a clock time is entered. This allows you to enter waiting time by date only, prior to the start of the test.

Templates should clear all data properly and not crash when loading even if you enter the gas properties panel while building the template.

Print preview table is now available.

Flow & Shut-in time columns calculate correctly.

A new column called elapsed flow time has been added.

A new column called choke size has been added to all new files as a default column. This column is different from the choke size column supplied and used by the Bean and Adjustable choke Meters and has NO effect affect on the gas rate calculations.

Bean Choke correlation's were extended from 0 - 3 inches (0 - 76.2 mm).

Save As Default in the Customize Table panel works properly.

We recently switched to Microsoft's new compiler, which introduced some unexpected errors, but as a result we cleared up a few of those bugs that were sporadic and non-repeatable. (i.e. printing).

When highlighting rows, columns, etc only the highlighted text turns white all other text colors remain unchanged.

In plots under Add/Remove curves if you remove a curve from the right side of the plot and immediately try to place it on the left side of the plot the program will terminate abruptly

Known Issues/Fixes

Further PAS PRD refinements.

The footer cums are now correct.

FieldNotes™ now allows cutting and pasting from other field measurements spreadsheets. Configure the FieldNotes™ table in the same way as the original spreadsheet. Cut individual columns or a range of columns from the original table. Highlight the comparable column in FieldNotes™, Right-Click and select Paste.

New Features

PAS PRD refinements.

Print filter now works correctly.

Cums are now calculated correctly. You must zero all meters at both the top and bottom of a shut in period to calculate cums correctly.

The new 32 bit FieldNotes™ offers more gas meter choices than the original FieldNotes™ did. Bean Chokes, Adjustable Chokes and ½" Integral Orifice Meters have been added to the existing meter selections of orifice meter, pitot tube and critical flow prover. Correlations below critical conditions have also been implemented.

FieldNotes™ allows the user to directly enter a measured rate for an oil, gas, water or condensate meter.

FieldNotes™ files can create PAS files for submission to the AEUB.

Clear recognition of flow and shut-in periods has been made possible by the assignment of a color to each period. On the screen, periods of flow are colored green, while periods of shut-in are colored red. Printouts indicate flow with white rows and shut-in with shaded rows.

FieldNotes™ has a revised table set-up. Once you add any meter an Add Columns dialog box appears immediately, which facilitates table customization. Also, when you would like to add a new column to a table the Show Columns option contains an alphabetically ordered list of only the headings relevant to the active meters. An added feature of the new FieldNotes™ table is the production summary which is printed at the bottom of each page.

Beyond the Field Measurements table, FieldNotes™ also includes a Production Summary Table and an Activity Log.

FieldNotes™ includes a report generator with which you can create a General Information Report, a Well Information Report or a Client Information Report. Each report can either be created from a default format or can be readily customized to suit each users needs. Hard copy reports of the EUB PAS-PRD Well Information and Test Data can also be easily generated.

FieldNotes™ has simplified the use of templates. When FieldNotes™ is first opened the user is immediately prompted to select a template, open an existing file or create a new file.

FieldNotes™ offers a number of new plotting features. Among these are annotation arrows which can be placed so that they point to a particular feature of the plot. Pointers can also be used to display the value of a particular data point. Cum time, date time and rate are only some of the items that can be displayed for any data point on the plot. Another added feature is the ability to display the Date and Clock time instead of the cumulative time as the scale on the x-axis. Additionally, the user can now include an unlimited number of annotations on any given plot.